Hoenderdaal Fasteners BV, headquartered in the Netherlands, stated that its Dynaplus® wood cladding screws are an ideal solution for fixing wooden boards to external walls or installing fence panels.

Due to the diamond tip, Dynaplus® wood screws are self-drilling, and the triangular tip provides maximum wood drilling capacity while maintaining high pullout strength for a firm connection. Hoenderdaal points out that this means that the screws can be used up to 2 cm from the edge of the plank without pre-drilling or splitting the wood.

In order to obtain a smooth surface, the cladding screw is equipped with an additional small pan head, which also prevents the splitting of the wood. When an ordinary countersunk head is used on a wooden board, the head can be used as a kind of wedge. When the wood starts to dry after installation, the chance of wood cracking due to the screw head increases. This problem does not occur with pan heads.

The TX driver provides the user with the best power transmission from the drill bit to the screw, and makes it easy to tighten. The screws are made of hardened carbon steel, and the balanced hardening process makes the screws very strong, but still very flexible. This reduces the risk of breaking the screw after processing during application and when the wood starts to shrink or expand.

Because Dynaplus cladding screws are intended for outdoor use, they have an AR (Anti-Rust) coating. The bronze coating is perfectly matched with the wood to create a beautiful finish, and a black coating version is also available. "AR coating is highly corrosion resistant and meets the highest standards; including corrosion class C4," Hoenderdaal Fastener mentioned. "This organic coating is composed of several layers on top of the electrolytic zinc coating, which provides very good adhesion to the coating. Even if the coating is slightly damaged during use, its self-healing ability can also provide permanent corrosion for the screw. protect."

Will joined Fastener + Fixing Magazine in 2007. In the past 14 years, he has experienced all aspects of the fastener industry-interviewing key figures in the industry, visiting leading companies and exhibitions around the world.

Will manages the content strategy of all platforms and is the guardian of the magazine's prestigious high editorial standards.

No account? Sign up

Signing up for fasterandfixing.com enables you to manage your account details.